Lotus Pools Floc granules 2kg
This product is ideal for use when suspended particles cloud the pool water. Floc granules should only be used in conjunction with sand or glass media filters.
Directions of use
Method 1
- Adjust pH to 7.4
- Dissolve 800gm per 45.5m3 (10,000 gals) in a plastic watering can.
- Disperse solution over the full pools surface and allow distribution.
- switch off the pool pump and allow to settle over a 12 hour period.
- carefully vacuum to waste.
- Repeat steps 1-5 if necessary
Method 2
- Adjust pH to 7.4
- Make sure skimmer is free of other chemicals.
- Dissolve at a rate of 100gm per 45.5m3 (10,000 gals) in a plastic bucket.
- Slowly pour solution into the skimmer and allow the filtration to run continuously.
- Backwash after hours.
- Repeat steps 1-5 if necessary.
NEVER MIX POOL CHEMICALS TOGETHER